TURBOLAMIK TCU 2.0 – 8HP TRANSMISSION CONTROL UNIT

TurboLamik TCU 2.0 is a high-class controller for ZF 8HP automatic transmissions, thanks to which we are able to control the automatic transmission in any car, allowing you to use the maximum potential of the engine and fast gear changes at 50-150ms.

Thanks to the possibility of configuring driving modes, we are able to adapt the controller to any type of car:

TurboLamik TCU 2.0 is a high-class controller for ZF 8HP automatic transmissions, thanks to which we are able to control the automatic transmission in any car, allowing you to use the maximum potential of the engine and fast gear changes at 50-150ms.

Thanks to the possibility of configuring driving modes, we are able to adapt the controller to any type of car:

Drifting Drag Racing Race OFF ROAD and other

The controller is sold with a configuration for a given car, thanks to which the customer does not have to make a map of the gearbox, it is enough to perform road adaptation. TCU 2.0 has a diagnosis of error codes and protection for the safety of the user in the event of a failure of the drive system.

Specification: 8 configurable driving modes Gear shifting: manual, automatic, semi-automatic, Smooth to sporty gearshift characteristics Auto Adaptation Auto diagnostics / error code memory Transbrake take-off procedure Virtual clutch On-line software update A1-A12 Analog Inputs

The freely configurable inputs can be used as CAN / ANALOG (extended stand alone ecu).

11 Outputs to control gearbox valves.

Analog output 1-4 analog outputs analog output, e.g. gear, brake, clutch signal.

AUX 1-8 outputs 0.5a low side

AUX 9-10 output 5A low side speed signal

AUX 11-12 3A high side output

AUX outputs support:

– idle signal

– reverse lamp signal

– ignition signal

– speed output

– gearbox cooler fan control

-transbrake output signal

– front wheel lock valve

CAN communication: 2 CAN channels, 125kb, 250kb, 500 kb & 1MB

The Turbolamik TCU 2.0 is designed for motorsport only and must not be used on public roads.

The Box including TCU, USB communication cable, connector & pins for TCU, connector & pins for 8HP gearbox & pinout diagram

Check out our other listings for Turbolamik install boards, program switches, LCD displays, connectors and wiring harnesses.